WE HAVE MOVED

NEW ADDRESS

 

 

 

 

Norwood Parade Auto Spares

54 the Parade, Norwood, Adelaide,

South Australia 5067

Ph 08 83634183 open 7 days www.derek.com.au

 

Email derek@derek.com.au

Home Page www.derek.com.au


Trading Hours
MON TO FRI 9.00am - 5.30pm
THU 9.00am - 5.30pm
SAT 9.00am - 3.00pm
SUN 10.00am - 3.00pm
PUBLIC HOLIDAYS 10.00am - 3.00pm

KLIPPAN

Autoliv Aftermarket manufactures a range of seat belts, buckles, made to order seat belts
and restraints including:
Industrial safety belts
Bus seat belts
Earthmoving seat belts
Automobile seat belts
Vintage car seat belts

Marine seat belts
Farming seat belts
Seat belts for the
disabled
Go Kart seat belts
Motor sports racing
harnesses
Child seat belts
Child restraints
Extension belts

 

GENERAL PURPOSE SEAT BELTS BABY SEAT BELTS

CHILD SAFETY HARNESS

Designed to be used by children weighing from 14 to 32 kg together with an adult lap seat belt only in forward facing seats.

Part number: K2018 (Black)
Part number suffix represents colour ie. K2018B (Blue) etc.

Comes in a range of 6 colours Black K2018
Grey K2018GY
Red K2018R
Blue K2018B
Green K2018G
yellow K2018Y


 

CHILD SAFETY ACCESSORIES

Extension Strap - 300mm

Part Number: K3740 (Black)
Part number suffix represents colour ie. K3740B (Blue) etc.

Comes in a range of 6 colours

For Klippan and other child restraints manufactured from 1993.
Black K3740
Grey K3740GY
Red K3740R
Blue K3740B
Green K3740G
yellow K3740Y

Extension Strap - 600mm

Part Number: K3741 (Black)
Part number suffix represents colour ie. K3741B (Blue) etc.

Comes in a range of 6 colours

For Klippan and other child restraints manufactured from 1993.
Black K3741
Grey K3741GY
Red K3741R
Blue K3741B
Green K3741G
yellow K3741Y

Universal Extension Strap -
300 - 1000mm

Part Number: K1171 (Grey)
Part number suffix represents colour ie. K1171B (Blue) etc.

Comes in a range of 5 colours

For Klippan and other child restraints manufactured from 1993.
Grey K1171
Red K1171R
Blue K1171B
Green K1171G
yellow K1171Y


Anchor Bolt Fitting Kit

Part Number: K1697

For Klippan and other child restraints manufactured from 1993.

 

Converter (Gaited Buckle)

Part Number: K2909

For Klippan and other harnesses requiring lap sash to lap conversion.


SEATBELT REPLACEMENT GUIDE

 

Autoliv Aftermarket make a comprehensive range of replacement seat belts for most cars and are a division of Autoliv Australia,

manufacturers of 100% of all seat belts fitted to cars made in Australia.

To choose one that suits your make and model, look through those shown below or ask for advice wherever Autoliv Aftermarket Seat Belts are sold.


Front-Rear non-retractable lap seatbelt with buckle

 


 

Front-Rear non-retractable lap/sash seatbelt with buckle


Front retractable lap/sash seatbelt with buckle


Rear retractable lap/sash seatbelt with buckle


 

Retractable lap seatbelt with buckle


Drop-link retractable lap/sash seatbelt with buckle

--------------------------------------------------------------------------------

Left: Image shows vertical 'on pillar' mount Left: Image shows vertical 'in pillar' mount


 


KLIPPAN GENERAL PURPOSE SEAT BELTS

 

 

As the name suggests these belts are for general, non-vehicle specific use.

The general-purpose range has been tested and approved to the AS/NZS 2596 'Seatbelts Assemblies for Motor Vehicles'.

Generally suitable for a wide variety, if not the majority of older vehicles.


Lap Sash Retractable (Inertia Reel)
Vertical On Pillar Mounting for:
Front bucket or bench seat with,

Stalk Buckle (lengths from 220mm - 450mm),

Stem Buckle (100mm - 210mm)

Adjustable Webbing Buckle (100mm - 950mm)


Lap Sash Retractable (Inertia Reel)
Horizontal Rear Parcel Shelf Mounting for:*
Front bucket or bench seat with,

Stalk Buckle (lengths from 220mm - 450mm),

Stem Buckle (100mm - 210mm)

Adjustable Webbing Buckle (100mm - 950mm)

*This belt can also be applied to replace existing lap belt only applications.


Lap Sash Non-Retractable for:
Front bucket or bench seat with,

Stalk Buckle (lengths from 220mm - 450mm),

Stem Buckle (100mm - 210mm)

Adjustable Webbing Buckle (100mm - 950mm)


Lap Belt Front or Rear for:*
Front bucket or bench seat with,

Stalk Buckle (lengths from 220mm - 450mm),

Stem Buckle (100mm - 210mm)

Adjustable Webbing Buckle (100mm - 950mm)

*Also suited for mini-bus and van applications
Note: All of the belts above are available in longer and shorter combination lengths.


BUCKLES

These buckles can be used with any combination of Lap Sash Retractable, Lap Sash Non-Retractable and Lap Belt.

Note: For special applications, fixed webbing still available.


Webbing Buckles

190mm

275mm

425mm

500mm


ADJUSTABLE WEBBING BUCKLES

 

150MM TO 610MM

150MM TO 950 MM


STALK BUCKLES

220MM

250MM

300MM

350MM

385MM

400MM

450MM

 


 

STEM BUCKLES

135MM STEM BUCKLE

170MM STEM BUCKLE


Extension belt K6629
The seat belt extension can be used in a large number of cars in both front and rear seats.

Ideal for the larger occupant where the existing belt is not long enough and when installing a child seat or capsule.

The Seat Belt Extension adds around 40cm to the belts overall length.

 

If your fat and dont fit the standard seatbelt like small people grab one of these and make sure your safe as well..

Fitting is easy as the belt simply clicks into the existing seat belt and buckle and fits most Australian cars made over the last 8 years.

For vehicle compatibility please phone our technical/ sales line toll free on 1800 804 588

 


 

Hi is you inertia reel seat belt hard to use or jammed

 

please use this link to a PDF file which might help you fix the problem.

WWW.DEREK.COM.AU/klippanlockupretractor.pdf

 

 

 

 

Our test services are widely used by vehicle manufacturers, automotive component suppliers, safety and regulatory organizations and other industry sectors.

Here at Autoliv Test Centre we offer test services that are supported by an experienced team of test personnel guided by national and international standards and backed up by a considerable investment in state of the art test equipment.


INSTRUCTIONS:

1. Inspect the original seatbelt and determine the
type of seatbelt required. (retractable or non
retractable, mounted on or inside the pillar and
retractor angle.
2. Select the belt from the list on the left hand side of
the table, which closely matches the original seatbelt.
Match the belt length and retractor angle to +/- 5
degrees. For retractor angles greater than 90° use a
forward facing retractor from the other side of the car
as per examples below.

80/90 RH = 100/90 LH & 80/90 LH = 100/90 RH
75/90 RH = 105/90 LH & 75/90 LH = 105/90 RH
60/90 RH = 120/90 LH & 60/90 LH = 120/90 RH
40/90 RH = 140/90 LH & 40/90 LH = 140/90 RH

 

3. Measure the length of the original buckle (from the
centre of the bolt hole on the anchor to the end of the
buckle head)
4. Select a buckle from the top of the table which
matches the original length and type of buckle. (Add
or subtract up to 25mm to the length of the original
buckle if necessary to obtain a match)
5. The “kit” number which matches the required belt
and buckle is the part number required for your
application.
Eg. K7198 = 80/90 On Pillar (OP) RH with a 170mm
stem
ABBREVIATIONS:
RH – Right Hand, drivers side of the vehicle
LH – Left Hand, passenger side of the vehicle

 

RETRACTOR ANGLE INFORMATION
90/90 is a vertically mounted retractor, seatbelt
webbing leaves the retractor and extends vertically to
the sash guide.
0/0 is a horizontally mounted retractor, usually
mounted flat on top of the parcel shelf in rear seating
positions. Can not be used for floor mounted
applications.
180/180 is a horizontally mounted retractor, usually
mounted flat under the parcel shelf in rear seating
positions.
80/90 is a retractor that leans 10 degrees from
vertical towards the front of the vehicle.
100/90 is a retractor that leans 10 degrees from
vertical towards the rear of the vehicle.
75/90 is a retractor that leans forward 15 degrees
from vertical towards the front of the vehicle.
60/90 is a retractor that leans forward 30 degrees
from vertical towards the front of the vehicle.
40/90 is a retractor that leans 50 degrees from
vertical towards the front of the vehicle.
SEATBELT ACCESSORIES:
Compatible with Kilppan seatbelts
K2887 Reinforce kit
K4408 Right angle Bracket
K4425 Fitting kit Bracket
K6020 Nyloc Nut (x4)
K6030 Bolt Cap (x2)
K6040 Retractor Cover (x1)
K6629 Extension Belt
K7099 Drop link (250mm)
K7099S Drop link (150mm)

 

 

CHILD SAFETY ACCESSORIES
ALL BELTS COMPLY TO AS1754


CHILD HARNESS

Designed to be used by children
weighing from 14 to 32 kg together with an adult lap
seat belt only in forward facing seats and or booster
seats.


EXTENSION STRAPS

Designed to be used in
conjunction with Klippan and other Child Harness
and various car seats manufactured from 1993.
These come in a range of fixed and adjustable
lengths.


ANCHOR BOLT FITTING KIT

Designed to secure
the Child Harness and or car seat in applications with
or without in-built anchorages.


CONVERTER (Gated buckle)

Suitable for Klippan
and other harnesses requiring lap sash belt to be
converted to a lap belt. Typically this is required with
a 'H' Harness.

CHILD SAFETY ACCESSORIES:
K2018 CHILD SAFETY 'H' HARNESS
(Includes Anchor bolt kit and Gated Buckle)
K3740 EXTENSION STRAP 300MM
K3741 EXTENSION STRAP 600MM
K1171 EXTENSION STRAP 300MM - 1000MM
K1697 ANCHOR BOLT KIT
K2909 CONVERTER / GATED BUCKLE



also a range of seat belts

inertia reel

lap sash

and lap belts

 

4WD COVERS AH GO GAH HORN AIR FILTERS AIR HORNS ARMREST ASHTRAYS AUTO ACCESSORIES AUTO DRY WASH CLOTHS BABY BOLTS BACK SUPPORTS BADGES BATTERY CHARGERS BATTERY ISOLATOR SWITCH BLIND SPOT MIRRORS BOAT POLISH BOAT WASH BOAT WAX BODY FILLERS BOG BRAKE LIGHT REPAIR KIT BRAKE SHOES BUG SCREENS BULBS BUMPER SPRAY CABLE TIES CAR BATTERIES CAR COVER CAR MATS CAR STANDS CARAVAN COVERS CENTRE CONSOLES CHARGE AND MAINTAIN CHEMICALS CHEMIWELD COMPRESSION TESTER COOLANTS COOLING FANS CUT AND SHAPE MIRROR D SHACKLES DEGREASERS DISC PADS DISC PADS DOOR EDGE PROTECTORS DRI-LUBE DRIVE BELTS DRIVE SHAFTS DRIVING LIGHTS ELECTRIC WATER PUMPS ELECTRICAL TAPE ELECTRONIC IGNITION ENGINE PUMPS EXHAUST CLAMPS FAN BELTS FIBERGLASS FISHING ROD HOLDERS FOOT PUMPS FUEL CANS FUEL FILTERS FUEL HOSE GASKETS GLOSS BLACK GOGGLES H4 LIGHTS H7 LAMPS HAND PUMPS HEATER HOSES HELLA LAMPS HOSE CLAMPS HOUSINGS HYDRAULIC JACKS IGNITION COILS IGNITION LEADS INDUSTRIAL BELTS JACKS JOCKEY WHEELS JUMPER LEADS KEY FOBS L PLATES LEAD REPLACEMENT ADDATIVE LED HEADLAMPS LED LIGHTS LED TORCHES LENS REPAIR KITS LENS TINT LITTER BINS MAG WHEEL CLEANERS MASKING TAPE MASKS MATT BLACK MICRO CHAMOIS MICRO FIBRE CLOTHS MIRRORS MOTHER'S WAX ATTACK POLISHER MOTHERS WAX ATTACK POLISHER MOTOR BIKE STRAPS MUSICAL AIR HORN NAVIGATION LIGHTS NECK SUPPORTS NOLTEC SOFTRIDE URETHANE BUSHES OCCY STRAPS OIL CAPS OIL FILTERS P PLATES PAINT PAINT PETROL CAPS PHILLIPS LAMPS PLASTIC CHAMOIS PLASTIC DYE PLUGS POLISHES POLSHING CLOTHS PROJECTA RACK ENDS RADIATOR CAPS RADIATOR HOSES RECOVERY STRAPS RED BACK SPIDER GEAR KNOBS ROK STRAPS ROOF BARS ROOF BASKETS ROOF RACKS SEAT BELTS SEAT COVERS SLICK50 SLICK 50 SNATCH STRAPS SOLAR PANELS SPANNERS SPARE WHEEL COVERS STAINLESS STEEL BOLTS STEERING WHEEL COVERS SURGE GUARDS SWITCHES SYNTHETIC CHAMOIS SYNTHETIC OILS THERMOSTATS THINNERS TIE ROD ENDS TIMING BELTS TIMING LIGHTS TOOLS TOOLS TOP COAT CLEAR TOW HOOKS TOW ROPES TRAILER CABLE TRAILER LAMPS TRIPLE AIR HORNS TROLLEY JACKS TRUCK HOSES TRUCK WASH TUBE PATCHES TUBELESS TYRE REPAIR KITS TRUCK JUMPER LEADS TWIN AIR HORNS TYRE SPRAY TYRE VALVES UNIVERSAL JOINTS UTE HOOKS VACUMN TESTER WALL PROTECTORS WASHER MOTORS WATER HOSE WATER PUMPS WATERPROOF TRAILER LAMPS WHEEL BRACES WHEEL CHOCKS WHEEL CYLINDERS WINDOW SHADES WINDOW SOX WINDSCREEN WIPERS WIPER ARMS WIPER BLADES WIPER JETS WIPER MOTORS WIPER REFILLS