Norwood Parade Auto Spares
54 the Parade, Norwood, Adelaide,
South Australia 5067
Ph 08 83634183
open 7 days
Home Page www.derek.com.au
MON TO FRI 9.00am - 4.30pm
SAT 9.00am - 1.30pm
SUN 10.00am - 1.30pm
PUBLIC HOLIDAYS 11.00am - 1.30 pm call first !
INOX LUBRICANTS AND CONDITIONERS
MX2 Battery Conditioner
INOX BATTERY CONDITIONER
1 litre $49.99
New life for mechanically sound older batteries and double life expectancy for new ones.
For use in cars, motorcycles, boats, trucks, buses, aviation, farm &
earth moving equipment, industrial, solar & stationary batteries.
1 Litre, 20 Litre, 5 Litre, 92ml
INOX MX2 is in a class of its own, the only product of its kind that keeps giving outstanding results year in, year out!
Approximately 70% of lead-acid batteries over a period of time stop operating because of sulfation on the plates.
Charging the battery does not stop this sulfation from happening. INOX MX2 Battery Conditioner can be added at any time during the life cycle of a lead acid battery,
but for the best results and longest life for the battery, it is best to add the INOX MX2 Battery Conditioner when the battery is brand new.
Why MX2 ?
Dissolves battery killing sulfation
Better & faster cold morning starts
Constant brighter lights
Rapid power recovery & recharge
Holds charge longer between use
Increases battery efficiency up to 18%
Up to 2 3 times longer use
Up to 12 months additional warranty
ANSWERS TO COMMONLY ASKED QUESTIONS
ON INOX BATTERY CONDITIONER
What is INOX Battery Conditioner ?
INOX Battery Conditioner is an electro-chemical catalyst
that can be added to all
lead-acid batteries to increase the performance and life of the battery.
What are the benefits of adding INOX Battery Conditioner to a lead-acid battery ?
It helps stop lead sulphate build up on the plates, increases battery life by up to 2 to 3 times, increases battery efficiency by 18%, gives brighter lights, faster starts & recharge.
Will INOX Battery Conditioner work in older batteries ?
Providing the older battery has only a sulphate problem and is mechanically sound, it should add another 1 to 2 years life to the battery. NB. There is about a 2 - 3% failure rate when adding INOX Battery Conditioner to older batteries. It is not recommended adding INOX Battery Conditioner to batteries that are more than 2 years old.
What is the INOX Battery Conditioners manufacturer's warranty ?
When INOX Battery Conditioner is added to a new battery
in the first 2 weeks and the completed warranty form is sent to Candan Industries
Pty Ltd, there will be an additional full replacement warranty on the battery
equal to the battery manufacturer's warranty to maximum of 12 months and
will start the day the battery manufacturer's warranty expires.
EG. Battery with 6 months battery manufacturer's warranty gets an additional 6 months with the INOX Battery Conditioner ( I B C ) (making 12 warranty in total). 12 months
BMW plus 12 months I B C (24 months in total). 24 months BMW plus 12 months I B C (36 months in total).
INOX® QUALITY PRODUCTS
"There is no substitute for Quality"
INOX BATTERY CONDITIONER
DOES IT AGAIN
10 YEARS + USING INOX Battery Conditioner
Above is the photo of a battery that was used in a 1990 Daihatsu Feroza from 10 July 1995 until 5 August 2005 before it was replaced by it's owner David Steers ( Aircraft Engineer ). All David ever did was keep the battery topped up with water and put INOX Battery Conditioner in every 2 years.
David told us that the battery is still working, but because the vehicle now only gets started every 1 - 2 weeks, it was starting to get a bit slow for starting, so he decided to replace it with a new one. After all it did give him 10 yrs + good service and in David's own words " I can only put this extraordinary service life down to INOX Battery Conditioner and regular maintenance ".
David also told about another battery he and his brother had in a canoe as lighting battery for years, then his brother put in his car and it was still working well when he sold the car 5 years later. All thanks to INOX Battery Conditioner.
" I can't picture many battery manufacturers endorsing your product, but I more than happy to ", David Steers.
IF ANYONE ELSE HAS ANY INTERESTING STORIES THEY WOULD LIKE TO SHARE WITH US ON USING INOX PRODUCTS PLEASE SEND THEM TO US.
INOX MX3 LUBRICANT with needle 60ml $6.99
INOX MX3 LUBRICANT 300G $9.99
INOX MX3 LUBRICANT 5litre $59.99
INOX MX3 LUBRICANT 20 LITRE $185.00
DISPLACES - PENETRATES LUBRICATES - PROTECTS
The only lubricant in the world with the special MX3 anti-corrosion,
anti-moisture formula for the twenty first century.
60ml Needle Injector, 100 & 300g Aerosol, 125ml Pump Pack (unpressurized), 5, 20 & 205 litre Containers. A 500ml spray applicator comes with each 5 & 20 litre and 6 applicators with the 205 litre. Screw in taps are supplied with each 20 & 205 litre container.
Over the years INOX MX3 has become known as the Supreme Lubricant and the go to product when the highest of quality is needed. The special MX3 anti-corrosion, anti-moisture formula is now sought after all around the globe making it one of the leading lubricants in the world today.
These qualities make it safe for almost every market out there including: Automotive, aviation, commercial, domestic, electrical & electronics, engineering, farming & mining, firearms, fishing, hobbies, manufacturing, marine, motorcycles, sports and transport.
Why MX3 ?
Displaces, penetrates, lubricates and protects.
INOX-mx3 contains no silicon, acid, kerosene or dieselene.
INOX-mx3 will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals
INOX-mx3 doesnt dry out, gum up, become gooey or sticky or wash off with water.
INOX-mx3 is non-conductive, non-static, non-toxic, non-corrosive and non-staining
MX3 Lubricant Food Grade
The must have food grade lubricant.
INOX MX3 LUBRICANT (FOOD GRADE)
INOX FOOD GRADE 300G $12.99
INOX FOOD GRADE 5 LITRE $69.99
FOR FOOD & BEVERAGE PROCESSING MACHINERY AND EQUIPMENT
300g Aerosol, 5, 20 & 205 litre Containers. A 500ml spray applicator comes with each 5 & 20 litre and 6 applicators with the 205 litre. Screw in taps are supplied with each 20 & 205 litre container.
INOX MX3FG was released to cater specifically for the food and beverage industry. INOX-MX3FG holds the NSF, class H1 food grade approval which is the highest approval available on a lubricant and is recognised worldwide. This allows INOX-MX3FG to be used in all food applications all over the world. INOX-MX3FG is similar to the original formula with some changes to comply with the NSF H1 criteria. INOX-MX3FG has undergone stringent testing and stands strong amongst the other INOX products and even stronger amongst its competitors.
Features & Benefits
Displaces, penetrates, lubricates and protects.
INOX-mx3 FG contains no silicon, acid, kerosene, dieselene or toxic compounds
INOX-mx3 FG will not harm metal points or surfaces, plastics,paints, enamels, fibreglass, formica or neoprene seals.
INOX-mx3 FG doesnt dry out, gum up, become gooey or sticky or wash off with water.
INOX-mx3 FG is non-toxic, non-static, non-corrosive non-conductive and non-staining
MX4 Lanolin Lubricant
LANOX 300G LANOX MX4 LUBRICANT $11.99
LANOX MX4 LUBRICANT 5 litre $69 inc spray bottle
LANOX MX4 LUBRICANT 20 litre $230
APPLICATIONS & USES
Designed for heavy industrial, mining, farming, marine,
earth moving and transport type use and where extreme climatic and high
humidity conditions prevail.
300g Aerosol 5 litre Container 20 & 205
litre Drums . A 500 ml Spray Applicator is included with each 5 & 20
litre and 6 Spray Applicators with each 205 litre. A Tap is included with
each 20 & 205 Litre.
Lanolin is a natural wax found in animal wool especially the wool from sheep, commonly referred as WOOL FAT or WOOL GREASE, it has wide spread uses, cosmetics, medical, soaps, etc. Down through the centuries the Egyptians, Romans, Vikings, sailors and soldiers alike all used lanolin as a very effective anti- corrosion and waterproofing agent for a variety of metals, materials, timbers, to protect sails, leather, cannons, etc. Although we make INOX, a quality anti-corrosion lubricant, there are areas where a lanolin based anti-corrosion lubricant like LANOX is sometimes better suited for the application at hand.
LANOX is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and lanolin base with specialized chemical compounds.
LANOX contains no silicon, kerosene, acids or dieselene.
LANOX is harmless to metal points & surfaces, plastics, painted & enamel finishes, fibreglass, formica, rubber or neoprene seals.
LANOX doesnt become sticky, gooey or gum up.
LANOX is non-conductive, non-static & non-corrosive.
LANOX has neutral properties, low flammability (NON-AEROSOL)
Lanox doesnt dry out or wash off with water
LANOX MX4 LANOLIN GREASE
LANOX MX4 LANOLIN GREASE 500g, $29
Superior Anti-Corrosion Lanolin Grease
A quality food grade approved lanolin grease for protection against rust, corrosion & moisture in all industries when extreme climatic and high humidity conditions prevail.
It is made from a pure high technical grade anhydrous lanolin, food grade approved additives and anti-oxidants.
It has been especially designed to remain pliable at very low temperatures with the right amount of gripping tackiness (non-fling) to hang on and still have flexibility for the user.
LANOX MX4G Grease is waterproof, non-conductive and safe to use on all surfaces.
It is highly suitable for anti-corrosion, rust proofing and anti-fouling coatings for all metals used in Automotive, Aviation, Commercial, Construction, Earthmoving, Farming, Industrial, Marine, Mining and Transport applications. Waterproofs and protects leather. Preserves timber from water, cracking and dry rot. (Do not use on green timber). Anti-seize for bolts, nuts and threaded rod. Stops electrolysis between dissimilar metals.
Why MX4 Grease?
LANOX MX4G Grease is Non-carcinogenic, bio-degradable, highly resistant
to salt and acid corrosion, provides lasting protection.
LANOX MX4G Grease is environmentally and user friendly.
LANOX MX4G Grease looks like creamed honey and has no lanolin odour
LANOX MX4G Grease holds the NSF, class H1 food grade approval
MX5 Plus PTFE Lubricant
Extreme Pressure Liquid Lubricant with PTFE
INOX MX5 PLUS 300G $13.99
INOX MX5 PLUS 5L $89.99
INOX MX5 PLUS 20L Drum $275.00
Extreme pressure lubrication, superior penetration, quality anti-corrosion
protection with PTFE
300 g Aerosol, 5 & 20 litre containers
INOX MX5 plus has been specially formulated by modifying the original INOX base formula together with the addition of the high grade friction modifier Polytetrafluoroethylene (PTFE). INOX MX5 Plus has been designed for applications where a superior extreme pressure, anti-corrosion, anti-moisture, liquid lubricant or an industrial quality machine cutting lubricant is required.
MX5 Plus PTFE lubricant can also be used for any other application where an extreme pressure anti-corrosion liquid lubricant is required.
INOX MX5 Plus has been designed for applications where a superior extreme pressure, anti-corrosion, anti-moisture liquid lubricant, a high grade penetrating oil or an industrial quality machine cutting lubricant is required (Safe to use in saw, lathe & milling reservoirs).
INOX MX5 Plus will not harm metal points or surfaces, fibreglass, formica, painted or enamel finishes, plastics or neoprene seals.
INOX MX5 Plus will not become tacky, alter surface tolerances, dry out or wash off with water
INOX MX5 Plus is non-toxic, non-conductive, non-corrosive and non-staining.
Polytetrafluoroethylene (PTFE) is premium grade extreme pressure anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures and extends life.
MX6 Food Grade Grease
Food Grade Machinery Grease
INOX MX6 GREASE 30gm TUBE $6.99
INOX MX6 RUBBER GREASE 375G $22.99
INOX MX6 FOOD GRADE GREASE TUB 400G $29.99
INOX MX6 FOOD GRADE GREASE CARTRIDGE 450G $29.99
Extreme pressure, fully synthetic, high temperature (no
melt) food grade approved machinery grease with PTFE.
30g Tube, 400 & 450g Cartridges, 2.5 kg Tubs, 20 & 180 kg Drums
INOX MX6 is a fully synthetic Extreme Pressure grease formulated to give premium performance and food grade purity. This grease is composed entirely of ingredients which meet the requirements of section 178.3570 of the US FDA regulations and have been cleared for use within registered establishments by the US Department of Agriculture and will not deleteriously affect meat or meat products.
INOX MX6 is a smooth light brown grease made from polyalphaolafins and a special bentone thickner.It contains additives to protect against corrosion and oxidation. It has a temperature range of -30 C to an extremely high temperature (HAS NO MELTING POINT). It will operate non stop to 250 C all day with short bursts up to 300 C without breaking down.
Polytetrafluoroethylene (PTFE) is a premium grade anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures and extends life.
INOX MX6 holds the NSF, class H1 food grade approval.
INOX MX6 is a fully synthetic extreme pressure grease containing bentone, PTFE and polyalphaolafins.
INOX MX6 will not melt, has excellent resistance to water washout and will not affect rubber.
What can I use MX6 Food Grade Grease for?
INOX MX6 is highly suitable for all bearings, bushes, chains, hinges, sprockets, slides, splines & couplings, universals and ball joints used in all Food processing Machinery, Beverage Filling Lines, Food Conveyor Lines, Food Packaging Equipment, Ovens, Freezers and Cold Rooms.
INOX MX-7 Extreme Pressure PTFE Paste
125 GRAM TUBE $14.99
Premium grade ultra extreme pressure machinery assembly
and bearing lube pipe and thread anti-seize.
125g tubes & 18 kg drums
INOX mx-7 is a specially formulated Extreme Pressure Lithium based grease containing a high percentage of Polytetrafluoroethylene (PTFE) designed for Ultra Extreme Pressure applications and where tough thread anti-seize applications are required. INOX-MX7 is typically used in applications where two surfaces cannot be lubricated once assembled.
INOX mx-7 is a specially formulated Extreme Pressure Lithium based grease containing a high percentage of Polytetrafluoroethylene (PTFE) designed for Ultra Extreme Pressure Lubrication and where tough Thread Anti-Seize applications are required.
INOX mx-7 provides high film strength, protects against start up damage in new and reconditioned machinery after long down periods before initial startup.
INOX mx-7 gives long term lubrication to parts and machinery that are difficult or impossible to lubricate after assembly.
INOX mx-7 allows for more even torque pressures and faster breakouts of joints, gaskets and threads
INOX mx-7 contains anti-corrosion additives.
What can I use MX7 PTFE Assembly Lube for?
Engine & Cylinder Head Assembly
Injection Mold Tool Lubricant
Mechanical & Electrical Equipment Assembly
Thread & Pipe Anti Seize
Extreme Pressure Anti Friction Applications
Bearings, slides & bushes, engines & cylinder heads, electrical equipment, farming, industry, marine, threads & pipes and transport and automotive.
MX8 Extreme Pressure Grease
INOX MX8 PTFE GREASE 300G $14.99
INOX MX8 PTFE GREASE 450G CARTRIDGE $18.99
INOX MX8 PTFE GREASE 2.5KG $69.99
A premium industrial grade, extreme pressure, high temperature lithium
complex PTFE grease
300g Aerosol Spray Grease 400g and 450g Cartridges 500g
& 2.5kg Tubs 20kg & 180kg Drums
The extreme pressure and anti-wear properties of INOX MX8 grease gives long service life under high loading and shock loading conditions from very low to very high temperature environments. These special characters of shear stability, combined with the inclusion of effective rust, oxidation and corrosion inhibitors and tackiness adhesives, ensures this grease to perform in almost any application. INOX MX8 is a lithium complex grease, which means that it will hold together extremely well under high pressure and variable temperatures.
INOX-mx8 has the ability to prevent scuffing and reduce wear under high load and shock load conditions, together with its excellent high shear stability and high temperature operation, makes INOX-mx8 the preferred choice over other extreme pressure greases.
INOX-mx8 resists SQUEEZE OUT from surfaces requiring lubrication under load conditions.
INOX-mx8 has excellent resistance to water and water wash out even at elevated temperatures. Effective lubrication is maintained and in these situations it also gives protection against rusting and corrosion.
INOX-mx8 will not thin out because it is shear resistant or thicken because it is resists oxidation.
PTFE Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication and reduces operating temperatures to bearings, bushes, shafts, gears, chains, splines, PTOs, turntables, cables, universals, CV and ball joint.
Suitable for: Automotive, aviation, bearings, commercial, earthmoving, electrical, farming, fishing, industrial, marine, mining, shipping, wharves & slips and transport.
MX9 No Chucka Chain Lube
MX9 No Chucka Chain Lube
INOX NO CHUKKA CHAIN LUBE 150G $12.99
INOX NO CHUKKA CHAIN LUBE PTFE 300G $19.99
Superior grade, high speed, extreme pressure, PTFE chain lube.
150 and 300 gram aerosol cans
Originally designed for the superbike industry, INOX- MX9 No Chukka Chain Lube is now in high demand for numerous applications such as, hoists, harvesters, forklifts, conveyors and dirt bikes. The perfect blend of PTFE and tackifiers allow this chain lube to not only hold on but at the same time give you smooth effortless transmission in any application. Demand is particularly high in the harshest of farming conditions as INOX-MX9 is one of the most robust , durable and reliable chain lubes on the market today.
INOX-mx9 No Chukka Chain Lube is a superior grade, high speed, extreme pressure chain lube formulated with special tackifiers, coagulants, anti-corrosion and water proofing compounds to make it stay on the chain, hence the name No Chukka Chain Lube.
INOX-mx9 No Chukka Chain Lube contains the extreme pressure friction modifier PTFE (polytetrafluoroethylene) which gives increased lubrication, reducing wear and also helps in reducing operating temperatures.
INOX-mx9 No Chukka Chain Lube is highly resistant to salt, chemicals, water wash out and drying.
INOX-mx9 No Chukka Chain Lube will not harm motorcycle chain O rings
Directions for Use
1.It is recommended to clean the chain first by spraying it with INOX-mx11 Chain & Brake Clean. This will clean the chain and will leave it dry in a few minutes with no residue.
2.Next spray INOX-9 No Chukka Chain Lube directly onto the chain by using the extension tube attached to the spray button, this will give the best results for accuracy and concentration and reduces the problem of over spray. Make sure you spray this on the underside of the chain and be sure to roll it through so all links are covered.
3.Allow a few minutes (3 to 10 mins depending on the ambient temperature) for chain lube to penetrate the chain linkages and for the solvent carrier and propellant gas to evaporate.
MX11 Chain & Brake Cleaner
INOX CHAIN & BRAKE CLEAN 500G $13.99
INOX CHAIN & BRAKE CLEAN 20 LTR Drum $199.99
Readily removes oil, grease & brake fluid without disassembly, leaving
surfaces clean and dry.
500 gram aerosol cans and 20 litre drums
INOX MX11 Chain & Brake Clean readily dissolves oil, grease and grime and can be used as a degreaser for car, motorbike, truck, boat, industrial, mining, farming equipment parts, gears, cables, engines or on any equipment where there is contamination from any oil, grease or oil/grease dirt mixtures.
INOX MX11 Chain & Brake Clean is a fast acting degreaser for removing brake fluid, oil, grease or oil/grease dirt contaminants from chains and brake assemblies (including linings and pads) before or after disassembly, leaving them bone dry and squeaky clean in a matter of minutes with no residue. In instances where the oil/grease and dirt is caked on, a second application maybe required and at the same time it is advisable to use a firm non-metallic bristled cleaning brush to help loosen any caked on contaminant.
INOX MX11 Chain & Brake Clean is a solvent based cleaner that dries in minutes and leaves no residue.
CAUTION: Avoid direct contact with rubber and perspex and prolonged contact with neoprene and plastics. Use in a well ventilated area.
MX12 PTFE Supa Glide 175ML $17.99
The ultimate extreme pressure dry lubricant with PTFE
175 gram can
INOX-M12 PTFE SUPA GLIDE is a fast drying, resin bonded polytetrafluoroethylene dry film lubricant for the coating of timber, metal, plastic, rubber, glass and most other surfaces.
It is designed for low-friction, light load repetitive stresses that allows moving parts to wear longer, work harder and require less maintenance and has applications where other conventional sintered PTFE coatings cannot be considered.
Features & Benefits
Excellent lubrication qualities
Good surface adhesion
Hard abrasion-resistant surface
Clean and easy to apply
Longer wear life than pure PTFE coatings
Cures at room temperature
Doesnt wash off with water
Resists contamination from dirt and dust
Life-long lubrication in many applications
The surface to be coated must be clean, dry and free of any contaminants such as dust, oil, grease or powder. Information on surface preparation for more critical applications is listed below. Once the surface area has been prepared, spray a liberal coating on the area you want to lubricate and then allow time for the carrier and propellant gas to evaporate. Curing times are listed below.
WOOD - Sand lightly and wipe clean
STEEL Degrease or sandblast
STAINLESS STEEL - Degrease or sandblast
ALUMINIUM - Degrease, sandblast or anodize
COPPER ALLOYS - Degrease, sandblast and/or acid etch
RUBBER, PLASTICS, GLASS Clean with a solvent that will not affect the substrate