WE HAVE MOVED

NEW ADDRESS

NEW PHONE NUMBER

 

 

 

 

 

Norwood Parade Auto Spares

54 the Parade, Norwood, Adelaide,

South Australia 5067

Ph 08 83634183 open 7 days www.derek.com.au

 

Email derek@derek.com.au

Home Page www.derek.com.au


Trading Hours
MON TO FRI 9.00am - 5.30pm
THU 9.00am - 5.30pm
SAT 9.00am - 3.00pm
SUN 10.00am - 3.00pm
PUBLIC HOLIDAYS 10.00am - 3.00pm

 

DYNA GRIP

 

QuikSteel, Strong enough to lift a car!


CarGo Chemicals

CarGo Chemicals was founded in Houston, Texas in 1959 to manufacture and distribute the highest quality automotive repair chemicals, epoxy products and high temperature cold welds in the world. Today, CarGo still holds to their quality commitment.
EVERY CarGo brand product is formulated with 100% active ingredients.
CarGo sells only products that are manufactured by CarGo or with the direction from CarGo by other wholly owned companies of SOUTHWEST CORPORATION.
Products are researched and formulated at CarGo Chemical's headquarters in Conroe, Texas. CarGo is a wholly owned subsiduary of RECTORSEAL. RECTORSEAL is wholly owned by SOUTHWEST CORPORATION, a public traded company.
Brand names owned and manufactured by CarGo Chemicals include: Quiksteel, Quikbronze, Thermosteel and Seal-Up. CarGo brand products are distributed world wide.

 


SEAL-UP

METALLIC SEAL-UP

Metallic Seal Up is a scientific treated liquid glass (sodium silicate) sealer enhanced with copper that can be used to:

Seal cracks, leaks and holes in:

Radiators

Engine Blocks

Cylinder Heads

Freeze Plugs

Head Gaskets

Heater Cores

Metallic Seal Up can withstand temperatures of 538oC.

Metallic Seal Up can repair holes in engine cooling systems with a diameter of up to 30 thousandths of an inch.

Metallic Seal Up can repair cracks in engine cooling systems with a diameter of 15 thousandths of an inch - any length.

Metallic Seal Up can withstand pressures of up to 3,000 pounds per square inch.

Metallic Seal Up is NOT compatible with Glycol products. These must be removed before using Metallic Seal Up.

Seal-Up – The world’s best-selling permanent block sealer – contains pure copper to seal any or “all kinds” of leaks in radiators, engine blocks, cylinder heads, head gaskets and even industrial cooling systems. Seal-Up forms a permanent copper-ceramic seal that can withstand temperatures of 500 degrees C and pressures of 300 PSI. Our specially formulated product contains copper for its great strengthening properties. It also transfers the heat across the crack so you don’t get any hot spots.

SEAL- UP INSTRUCTIONS

Part Number 1008 – Use in systems up to 6 gallon capacity
Part Number 1116 – Use in systems above 6 gallon capacity

IMPORTANT: SEAL – UP WILL CLOG COOLING SYSTEM IF ANTIFREEZE IS PRESENT.

INSTRUCTIONS:
1. Drain and flush cooling system.
2. Fill radiator with water, replace radiator cap, idle engine until normal operating temperature is achieved.
3. With engine running, carefully remove radiator cap and add water to cover radiator core.
4. Shake SEAL – UP and pour into radiator. (Pour into cooling system only.)
5. Replace radiator cap and idle until leak stops (20 minutes minimum).
6. Stop engine, carefully remove radiator cap and open drain plugs.
7. Allow engine to sit for 12 hours (minimum 4 hours).
8. Flush remainder of SEAL – UP and water from engine.
9. Refill cooling system with proper mixture of water and coolant.
For a repair that lasts, insist on the best…. Seal-Up.


 

QUIKSTEEL PUTTY $11.95

QUIKSTEEL PASTE $11.95

 

- Your #1 Must-Have Repair Product

 

The HHO Water4Gas device BEST USE
QuikSteel is an all-purpose, full-strength adhesive that bonds like epoxy and hardens like steel. QuikSteel seals where other products can not - under and in water, in chemicals, and even in a liquid while a leak is occurring. It is safe, fast, long lasting, chemical and heat resistant.

QuikSteel can rebuild, reshape and repair almost any surface in your house and car, including all metal, wood, glass, ceramic, fiberglass, most plastics and masonry - even concrete. In fact, we can't think of a surface that QuikSteel won't work on.

One square inch of QuikSteel can lift three cars.

QuikSteel cures to more than twice the hardness of pine. You can sand, paint, drill, tap or turn it on a lathe -- anything else you would to steel or wood.

You can use QuikSteel under water, under your car, or under the eaves of your house. It sets up in 5 minutes, hardens like steel in 15 minutes, and cures completely in an hour. Once cured, QuikSteel can stand up to fluids and chemicals and heat. You just can't hurt it.

You'll love this stuff. It does almost everything except bark. We've included a list of our favorite applications but there are literally hundreds more. If you're not sure QuikSteel is right for the repair you have in mind, just call us. Or bookmark this page and return for updates.

For the Car

Put the rear view mirror back on the windshield
Repair leaks in gas tanks, diesel fuel tanks, radiators
Weld housings of all types, like water or fuel pumps and thermostats
Rebuild body parts and bumpers

For the Home

Inside
Replace or repair bathroom, kitchen and pool tiles
Fix broken furniture, cabinet doors, pot and pan handles
Fill nail holes in wood and plastic trim
Mount towel racks on ceramic tile
Repair tools and tool housings
Seal leaking water, drain and refrigeration pipes
Fill in cracks in porcelain sink, toilet or bath tub
Arts and crafts, jewelry repair, sculpting, stained glass
Outside
Patch exterior siding - either aluminum or vinyl, it doesn't matter
Fix those leaking rain gutters and down spouts

QuikSteel is certified safe by NSF for repair of all drinking water pipes, tanks and systems.

What do you use QuikSteel for? Let us know and if we post your application you'll receive six free tubes.
Tips for using QuikSteel

If you want QuikSteel to have a smooth, shiny finish, have a pan of water handy and dip your hand in it as you smooth out the QuikSteel.
You can form QuikSteel in a mold; just coat the mold first with an oil-based spray like PAM.
When repairing a leak in a water pipe or any pressure system, be sure to turn the water pressure off first. Make the repair, let QuikSteel cure, then turn the water or pressure back on.
After QuikSteel is fully cured, it can be exposed to any environment. It's impervious to water, solvents, fuels and acids, alkalines, oils, auto fluids, paint remover, and cleaners.
You can make underwater repairs -- in the swimming pool or under your boat -- but you'll need twice the time time for QuikSteel to set up and fully cure. The colder the water, the longer it takes QuikSteel to set up.

QuikSteel comes in ___(size)___tubes and is available in grey, white and blue. It also is available as copper putty for the repair of copper pipes, pots, pans, and wrought iron.

Come back soon. Bookmark this page and refer to it frequently for updates.

Tips for Using QuikSteel
For best results:

For a smooth, shiny finish, have a pan of water handy and dip your hand in it as you smooth out the QuikSteel.
To mold QuikSteel, simply coat the mold with an oil-based spray like PAM before applying the product.
When repairing a leak in a water pipe or any pressure system, turn the water pressure off first. Make the repair, let QuikSteel cure, then turn the water or pressure back on.
After QuikSteel is fully cured, it can be exposed to any environment. It's impervious to water, solvents, fuels and acids, alkalines, oils, auto fluids, paint remover, and cleaners.
You can make underwater repairsÑin a swimming pool or under a boat -- (like the swimming pool or boat) but you'll need to allow more time for QuikSteel to set up and fully cure. Probably about twice as long as usual. The colder the water, the longer it takes QuikSteel to set up.


QuikSteel White Epoxy Paste

Easy to use:
Mixes instantly. Fills cracks & holes. Withstands 266°C. Sets in 5 mins.
Steel Strong Epoxy Weld:
Permanently bonds to all types of Metals, Glass, Fibreglass, Ceramic, Plastic, PVC and more.
Hardens like steel:
Can be drilled, tapped, filed, machined, sanded and painted

Part No: 17502


QuikSteel Metal Tank Repair Kit

This repair kit contains everything needed to make permanent repairs to leaks in metal tanks or housings - from small pinhole to a large hole or crack.

Famous QuikSteel Steel Reinforced Epoxy Putty is impervious to petrol, diesel fuel, oil, automotive fluids, water, coolant and solvents. FAST, EASY, PERMANENT REPAIR - no need to empty or remove tank

Part No:6022k


QuikSteel Plastic Tank Repair Kit

This repair kit contains everything needed to make permanent repairs to leaks in plastic tanks or housings - from small pinhole to a large hole or crack.

Famous QuikSteel Plastic Repair Epoxy Putty is impervious to petrol, diesel fuel, oil, automotive fluids, water, coolant and solvents. FAST, EASY, PERMANENT REPAIR - no need to empty or remove tank.

Part No: 6522k


THERMOSTEEL
High Temp Metal Repair
Welds cracks & holes in iron and steel. Strength increases with heat!

ThermoSteel withstands temperatures to 2400 degrees F/ 1316 degrees C Repair furnaces, BBQ’s or any high heat item with ThermoSteel.

The strength actually increases with heat.

It is perfect for repairing cracks, holes and pits in exhaust manifolds, headers, catalytic converters, mufflers, tail pipes, crossovers, boilers, stoves, furnaces and barbeques.

Satisfaction guaranteed or your money back.


 

 

 

 

 

 

 

 

 

 

PERMANENT THREADLOCKER

49451

DynaGrip Permanent Threadlocker

Threadlocking Compound

Prevents nuts and bolts from loosening due to vibration.

Seals against leakage.

Technical Data

PRODUCT: Permanent Threadlocker/Sealant

PART NOS: 49451, 49452, 49454

DESCRIPTION

DynaGrip Permanent Threadlocker/Sealant is a specially developed Medium to High Strength Threadlocker, where controlled torque/tension is required. Lubricates during assembly, securing parts with High Strength retention, allowing disassembly when required.

APPLICATIONS

Where parts require locking but need to be disassembled. DynaGrip Permanent Threadlocker/Sealant resists vibration loosening and offers augmentation of on torque. On large diameter bolts or where there is a long engagement of the stud, the application of heat may be required for removal.

USEFUL HINTS/NOTES

DynaGrip Permanent Threadlocker/Sealant offers an advantage of Torque augmentation. Treated fasteners exhibit 20% + Breakloose to on Torque applied during assembly. Lubricating ability during assembly, medium to high strength locking action.

PROPERTIES

While DynaGrip Permanent Threadlocker/Sealant will perform on light oily surfaces, a reduction in strength of up to 10% may be expected.

INSTRUCTIONS FOR USE

Ensure parts are clean, dry and free from oil and grease.

PROCEDURE FOR APPLICATION

Product is normally hand applied from the bottle.

COMPATIBLE ACCELERATORS/PRIMER

Primers such as Primer N or the faster primer, primer T can be used. However, up to 30% strength loss can occur when using primer.

TECHNICAL FEATURES

Resin: . . . . . . . . . . . . . . . . . . . . . . Dimethacrylate

Color: . . . . . . . . . . . . . . . . . . . . . . Red

Cure Speed with Activator: . . . . . . <5 minutes

Cure Speed without Activator: . . . 5 min @ 25ºC (77ºF)

Viscosity (Thixotropic): . . . . . . . . . 1900-6800cps

Gap Fill: . . . . . . . . . . . . . . . . . . . . . .0.127mm (005")

Flash Point: . . . . . . . . . . . . . . . . . . >212ºF

Shelf Life: . . . . . . . . . . . . . . . . . 12 months @ 20ºC (68ºF)

Specific Gravity: . . . . . . . . . . . . . . 1.1-1.15

Max. Operating Temperature: . . . . –18ºC to 148ºC (-65ºF to + 300ºF)

CURED PERFORMANCE

Full Cure Time: . . . . . . . . . . . . . . 12 hours @ 20ºC (68ºF)

Typical Breakaway Strength: . . . . 1.73-2.88 Kg/M (150-250 lbs")

Typical Prevailing Strength: . . . . . 1.15-2.30Kg/M (100-200 lbs")

STORAGE

Store in a cool area out of direct sunlight. Shelf Life: 12 months @ 20ºC (68ºF).

PRESENTATION

Bottles: . . . .. . . . . . . . 6ml

HEALTH & SAFETY IN USE

IRRITANT: Contains Methacrylate Esters and some products contain small amounts of Acrylic Acid. Irritates the eyes, the respiratory organs and the skin. In case of contact with the skin, wash immediately with plenty of water.

REVISED 03/31/99
TDSTL62

The information contained herein is produced in good faith and is believed to be reliable but is for guidance only

AFC International Pty. Limited and its agents cannot assume liability or responsibility for results obtained in the use of its product by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in our literature and furthermore the users responsibility to observe and adapt such precautions may be advisable for the protection of personnel property in the handling and use of any of our products.


REMOVABLE THREADLOCKER

49441

DynaGrip Removable Threadlocker

Threadlocking Compound

Prevents nuts and bolts from loosening due to vibration.

Seals against leakage.

For application before assembly

PRODUCT: REMOVABLE THREADLOCKER/SEALANT

PART NO: 49461

DESCRIPTION

DynaGrip Removable Threadlocker a general purpose Removable Medium Strength product. It will hold all metric, imperial or conventional sized nuts and bolts, meeting the requirements of over 80% of fastening applications. DynaGrip Removable Threadlocker does not run off or drip and does not migrate after assembly. Once applied, parts slip together easily, lubricated by the adhesive.

APPLICATIONS

Replaces lock washers and plastic inserts. Locks machine tool access bolts, studs, and hydraulic system bolts. Used on gear box bolts/driveshaft, bearing cover cap screws, counter sunk screws, conveyor roller bolts and construction equipment.

USEFUL HINTS/NOTES

Using DynaGrip Removable Threadlocker threadlocker is easy, the product is color coded blue and once cured, it seals and vibration proofs the assembly, giving controlled breakloose and prevailing torques. Using conventional tools you can disassemble parts. When force is applied, the parts breakloose (first movement) but it will take several turns before the cured film will stop resisting the turning action, thus ensuring against accidental component disassembly.

PROPERTIES

Controlled torque tension. Easily removed with conventional tools. Thixotropic nature prevents run-off on application and migration after assemblies.

INSTRUCTIONS FOR USE

Ensure parts are clean, dry and free from oil and grease.

PROCEDURE FOR APPLICATION

Product is normally hand applied from the bottle.

COMPATIBLE ACCELERATORS/PRIMER

Ritelok Primer T, or Primer N can be used. However up to 30% strength loss can occur when using primers.

TECHNICAL FEATURES

Resin: . . . . . . . . . . . . . . . . . . . . . . Dimethacrylate
Color: . . . . . . . . . . . . . . . . . . . . . . Blue
Cure Speed with Activator: . . . . . . <5 minutes
Cure Speed without Activator: . . . 20 min @ 25ºC (77º F)
Viscosity (Thixotropic) . . . . . . . . . . 1200-5000cps
Gap Fill: . . . . . . . . . . . . . . . . . . . . . .0.127mm (005")
Flash Point: . . . . . . . . . . . . . . . . . . >100ºC (>212ºF)
Shelf Life: . . . . . . . . . . . .. . . . . . 12 months @ 20ºC (68ºF)
Specific Gravity: . . . . . . . . . . . . . . 1.1 to 1.15
Max. Operating Temperature: . . . . -18ºc to 204ºC ( -65ºF to + 400ºF)

CURED PERFORMANCE

Full Cure Time: . . . . . . . . . . . . . . . 12 hours @ 20ºC (68ºF)
Typical Breakaway Strength . . . . . . 1.15 – 2.30 Kg/M (100-200 lbs")
Typical Prevailing Strength . . . . . . .0.34 – 0.69 Kg/m (30-60 lbs")

STORAGE

Store in a cool area out of direct sunlight. Shelf Life > 12 month @ ambient temperature.

PRESENTATION

Bottles: . . . . . . . . . . . . 6ml

HEALTH & SAFETY IN USE

IRRITANT: Contains Methacrylate Esters and some products contain small amounts of Acrylic Acid. Irritates the eyes, the respiratory organs and the skin. In case of contact with the skin, wash immediately with plenty of water.


DynaGrip Wicking Threadlocker

Threadlocking Compound

Prevents nuts and bolts from loosening due to vibration.

Seals against leakage.

 

WICKING THREADLOCKER

Technical Data

PRODUCT NAME: WICKING ADHESIVE AND SEALANT

DESCRIPTION

DynaGrip Wicking Adhesive And Sealant is a fast cure anaerobic securing compound which is very low in viscosity, thus enabling the wicking action to search into the voids in assembled components and cure anaerobically in the absence of air on close fitting metal parts.

APPLICATIONS

DynaGrip Wicking Adhesive Sealant prevents loosening of metal threaded fasteners and secures close fitting cylindrical parts, sealing the parts from leakage.

USEFUL HINTS/NOTES

DynaGrip Wicking Adhesive Sealant can also be used as a weld or porosity sealant and seeks out casting irregularities (hairline cracks). A unique capillary action allows the sealant to penetrate the smallest pores or cracks to provide a positive seal. The product can also fluoresce under UV lamps for inspection purposes.

PROPERTIES

A Fast Setting Anaerobic which wicks (by capillary action) into already assembled parts, searching into the voids to set into a strong insoluble polymer.

INSTRUCTIONS FOR USE

Ensure parts are clean, dry and free from oil and grease.

PROCEDURE FOR APPLICATION

Product is normally hand applied from the bottle directly onto threaded parts, for weld porosity or hairline cracks in casting products, it is brushed directly onto the parts.

COMPATIBLE ACCELERATORS/PRIMER

Low temperature, larger gaps or passive substrates may require the use of Primer N or T. Using a primer to increase cure speeds impedes the products ability to wick and seal. While it can be used on threadlocking applications it is not recommended for sealing porosity or hairline cracks. The application of heat can accelerate cure speeds.

TECHNICAL FEATURES

Resin: . . . . . . . . . . . . . . . . . . . . . . Dimethacrylate
Color: . . . . . . . . . . . . . . . . . . . . . . Green
Cure Speed with Activator: . . . . Not Recommended
Cure Speed without Activator: . . 20 min @ 25ºC (77º F)
Viscosity: . . . . . . . . . . . . . . . . . . . . 10-25 cps
Gap Fill: . . . . . . . . . . . . . . . . . . . . . 0.10mm (.004")
Flash Point: . . . . . . . . . . . . . . . . . . >100ºC (>212ºF)
Shelf Life: . . . . . . . . . . . . . . . . . . 12 months @ 20ºC (68ºF)
Specific Gravity: . . . . . . . . . . . . . . 1.1-1.15
Max. Operating Temperature: . . . . -18ºc to 204ºC ( -65ºF to + 400ºF)

CURED PERFORMANCE

Full Cure Time: . . . . . . . . . . . . . . 12 hours @ 20ºC (68ºF)
Typical Breakaway Strength: . . . . 0.23-1.15Kg/M (20-100 lbs")
Typical Prevailing Strength: . . . . . 2.30-4.03Kg/M (200-350 lbs")

STORAGE

Store in a cool area out of direct sunlight.
Shelf Life > 12 months @ ambient temperature.

PRESENTATION

Bottles: . . . . .. . . . . . . 6ml

HEALTH & SAFETY IN USE

IRRITANT: Contains Methacrylate Esters and some products contain small amounts of Acrylic Acid. Irritates the eyes, the respiratory organs and the skin. In case of contact with the skin, wash immediately with plenty of water.

REVISED 04/04/94
TDSTL90

The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. AFC International Pty. Limited and its agents cannot assume liability or responsibility for results obtained in the use of its product by persons whose methods are outside or beyond our control. It is the users responsibility to determine the suitability of any of the products and methods of use or preparation prior to use mentioned in our literature and furthermore the users responsibility to observe and adapt such precautions may be advisable for the protection of personnel property in the handling and use of any of our products.


Medium Strength Bearing Locker.
Fills Gaps up to 0.0005" around bearing housings protecting against loosening.
Resistant to Oil, Water, Transmission Fluids, Gycol Products and Mild Acids.
Works within a temperature range of -53°C to +148°C.
Sheer Strength 2000-3000psi.
Fixture tight in minutes.

Part No:49471


 

WEATHERSTRIP AND TRIM ADHESIVE

Technical Data

PRODUCT: WEATHERSTRIP ADHESIVE

PART NO: 49429

DynaGripTM Weatherstrip Adhesive is a black liquid of brushing viscocity made in Australia. It forms a strong, permanent bond between the following materials:

Rigid PVC Sheet, Polyurethane foams of the polyester and Polyether types, Supported PVC leather cloths, Leather, Polyester Glass Fibre, Rubber Sheet, Hardboard, Chipboard, Wood, Painted or Unpainted Metals, Rigid Laminated Plastics, Furniture, Footwear and much more.

DynaGripTM Weatherstrip Adhesive gives the best results when the two surfaces to be bonded are clean and dry.

DynaGripTM Weatherstrip Adhesive should be applied using either a brush or scraper to apply a thin even coating of adhesive to both surfaces.

Allow the solvent to evaporate before bonding. Permeable materials such as Leather or chipboard can usually be bonded within 2-3 minutes. Non-permeable materials such as Metals may require a minimum of 15 minutes before bonding. Bond the materials under firm pressure.

ENSURE ACCURATE PLACEMENT OF SURFACES WHEN BONDING AS THEY CANNOT BE MOVED ONCE PLACED TOGETHER. If some measure of ‘slide’ is required, you can bring the two surfaces together within 2-3 minutes of applying adhesive (permeable materials only). This technique is not recommended for non-permeable surfaces as solvent will be trapped between both joints and will reduce the strength of the bond.

DynaGripTM Weatherstrip Adhesive should be used in a WELL-VENTILATED AREA and AWAY FROM FLAMES/HEAT. This product is HIGHLY FLAMMABLE – FLASH POINT 30° C.

ENSURE PRODUCT IS STORED IN THE ORIGINAL CONTAINER WITH THE LID/CAP SECURELY TIGHTENED AND AWAY FROM HEAT SOURCES AND DIRECT SUNLIGHT.

KEEP OUT OF REACH OF CHILDREN

DynaGripTM Weatherstrip Adhesive can be used as a temporary repair by applying adhesive to only one surface.

The information contained herein is produced in good faith and is believed to be reliable but is for guidance only.


BLACK LOW VOLATILE AUTOMOTIVE SEALANT

Technical Data

PRODUCT: LOW VOLATILE AUTOMOTIVE SEALANT - BLACK
PART NOS: 47200, 49290

PRODUCT DESCRIPTION:

DynaGrip Low Volatile Automotive Sealant is a past like, one part material that cures to a rough rubbery solid upon exposure to moisture in the air. DynaGrip Low Volatile Automotive Sealant does not run thus making it ideal for use in either overhead or vertically. DynaGrip Low Volatile Automotive Sealant is formulated to meet or exceed OEM Volatility specifications for use near Engine Sensors.

PERFORMANCE PROPERTIES:

DynaGrip Low Volatile Automotive Sealant will not corrode or NOT adhere to Copper, Brass Magnesium, Zinc, Galvanized Metal. This sealant is NOT recommended for use on Brick, Masonry and Cement Type surfaces. During curing, product will emit an Acetic Acid type smell. DynaGrip Low Volatile Automotive Sealant has good resistance to weathering, vibration, moisture, ozone and extremes of temperature. It may be applied in sub-zero temperatures without the loss of extrusion or physical properties and is effective to –35oC. DynaGrip Low Volatile Automotive Sealant can withstand temperatures of 232oC and intermittently 260oC. At temperatures of 25oC, and a relative humidity of 50% a tack free skin will form in 20 minutes. Tooling should be complete in 5-10 minutes. Curing time increases with the thickness of the joint. Metal to metal bonds should not be more that 25mm. Adhered to glass, metals and most woods DynaGrip Low Volatile Automotive Sealant has a typical peel strength of 20lb/in2 after 72 hours curing at room temperature. When stored in a closed container at 32oC, DynaGrip Low Volatile Automotive Sealant has a shelf life of 15 months. Although an acidic odour is given off during curing, this will not harm oxygen sensors and will disappear after curing is complete.

PROPERTY DATA:
Colour Black
Type One Part silicone Rubber
Physical Form Non Slumping Paste
Cure Room Temp. On exposure to Water vapour in air.
Special Properties Meets or Exceeds OEM Volatility Specs.
Safe to use on vehicles with Oxygen Sensors.

AS SUPPLIED:

Specific Gravity @ 25oC 1.04
Extrusion Rate 350
Tack Free Time @25oC and 50% RH Minutes 10-20
Cure Time @25oC and 50% RH Hours 24

AS CURED:

ASTM D-2240 Durometer Hardness, Shore A Points 24
ASTM D-412 Die C Tensile Strength MPa (psi) 2.4 (350)
ASTM D-412 Die C Elongation Percent 600
ASTM D-746 Brittle Point Degrees C (F) -73 (-100)

TYPICAL USES:

DynaGrip Low Volatile Automotive Sealant can be typically used on sealing turbo housings, Exhaust manifolds, oxygen sensors, auto trim, including fabric backed plastics and make formed in place gaskets.


GREY LOW VOLATILE AUTOMOTIVE SEALANT

Technical Data

PRODUCT: LOW VOLATILE AUTOMOTIVE SEALANT - GREY
PART NOS: 47181

PRODUCT DESCRIPTION:

DynaGrip Low Volatile Automotive Sealant is a past like, one part material which cures to a rough rubbery solid upon exposure to moisture in the air. DynaGrip Low Volatile Automotive Sealant does not run thus making it ideal for use in either overhead or vertically. DynaGrip Low Volatile Automotive Sealant is formulated to meet or exceed OEM Volatility specifications for use near Engine Sensors.

PERFORMANCE PROPERTIES:

DynaGrip Low Volatile Automotive Sealant will not corrode or NOT adhere to Copper, Brass Magnesium, Zinc, Galvanized Metal. This sealant is NOT recommended for use on Brick, Masonry and Cement Type surfaces. During curing, product will emit an Acetic Acid type smell. DynaGrip Low Volatile Automotive Sealant has good resistance to weathering, vibration, moisture, ozone and extremes of temperature. It may be applied in sub-zero temperatures without the loss of extrusion or physical properties and is effective to –35oC. DynaGrip Low Volatile Automotive Sealant can withstand temperatures of 232oC and intermittently 260oC. At temperatures of 25oC, and a relative humidity of 50% a tack free skin will form in 20 minutes. Tooling should be complete in 5-10 minutes. Curing time increases with the thickness of the joint. Metal to metal bonds should not be more that 25mm. Adhered to glass, metals and most woods DynaGrip Low Volatile Automotive Sealant has a typical peel strength of 20lb/in2 after 72 hours curing at room temperature. When stored in a closed container at 32oC, DynaGrip Low Volatile Automotive Sealant has a shelf life of 15 months. Although an acidic odour is given off during curing, this will not harm oxygen sensors and will disappear after curing is complete.

PROPERTY DATA:
Colour Grey
Type One Part silicone Rubber
Physical Form Non Slumping Paste
Cure Room Temp. on exposure to Water vapour in air.
Special Properties Meets or Exceeds OEM Volatility Specs.
Safe to use on vehicles with Oxygen Sensors.

AS SUPPLIED:

Specific Gravity @ 25oC 1.04
Extrusion Rate 350
Tack Free Time @25oC and 50% RH Minutes 10-20
Cure Time @25oC and 50% RH Hours 24

AS CURED:

ASTM D-2240 Durometer Hardness, Shore A Points 24
ASTM D-412 Die C Tensile Strength MPa (psi) 2.4 (350)
ASTM D-412 Die C Elongation Percent 600
ASTM D-746 Brittle Point Degrees C (F) -73 (-100)

TYPICAL USES:

DynaGrip Low Volatile Automotive Sealant can be typically used on sealing turbo housings, Exhaust manifolds, oxygen sensors, auto trim, including fabric backed plastics and make formed in place gaskets.


RED HIGH TEMPERATURE AUTOMOTIVE SEALANT

Technical Data

PRODUCT: LOW VOLATILE AUTOMOTIVE SEALANT - RED
PART NOS: 49202, 49292

PRODUCT DESCRIPTION:

DynaGrip Low Volatile Automotive Sealant is a past like, one part material that cures to a tough rubbery solid upon exposure to moisture in the air. DynaGrip Low Volatile Automotive Sealant does not run thus making it ideal for use in either overhead or vertically. DynaGrip Low Volatile Automotive Sealant is formulated to meet or exceed OEM Volatility specifications for use near Engine Sensors.

PERFORMANCE PROPERTIES:

DynaGrip Low Volatile Automotive Sealant will not corrode or NOT adhere to Copper, Brass Magnesium, Zinc, Galvanized Metal. This sealant is NOT recommended for use on Brick, Masonry and Cement Type surfaces. During curing, product will emit an Acetic Acid type smell. DynaGrip Low Volatile Automotive Sealant has good resistance to weathering, vibration, moisture, ozone and extremes of temperature. It may be applied in sub-zero temperatures without the loss of extrusion or physical properties and is effective to –35oC. DynaGrip Low Volatile Automotive Sealant can withstand temperatures of 232oC and intermittently 315oC. At temperatures of 25oC, and a relative humidity of 50% a tack free skin will form in 20 minutes. Tooling should be complete in 5-10 minutes. Curing time increases with the thickness of the joint. Metal to metal bonds should not be more that 25mm. Adhered to glass, metals and most woods DynaGrip Low Volatile Automotive Sealant has a typical peel strength of 20lb/in2 after 72 hours curing at room temperature. When stored in a closed container at 32oC, DynaGrip Low Volatile Automotive Sealant has a shelf life of 15 months. Although an acidic odour is given off during curing, this will not harm oxygen sensors and will disappear after curing is complete.

PROPERTY DATA:
Colour Red
Type One part Silicone Rubber
Physical Form Non Slumping Paste
Cure Room Temp. Cure on exposure to Water-vapour in air.
Special Properties Meets or Exceeds OEM Volatility Specs. Safe to use on vehicles with Oxygen Sensors.

AS SUPPLIED:

Specific Gravity @ 25oC 1.04
Extrusion Rate 350
Tack Free Time @25oC and 50% RH Minutes 10-20
Cure Time @25oC and 50% RH Hours 24

AS CURED:

ASTM D-2240 Durometer Hardness, Shore A Points 24
ASTM D-412 Die C Tensile Strength MPa (psi) 2.4 (350)
ASTM D-412 Die C Elongation Percent 600
ASTM D-746 Brittle Point Degrees C (F) -73 (-100)

TYPICAL USES:

DynaGrip Low Volatile Automotive Sealant can be typically used on sealing turbo housings, Exhaust manifolds, oxygen sensors, auto trim, including fabric backed plastics and make formed in place gaskets.


No. 2 Soft Set Gasket Sealer
DynaGrip® Gasket Sealer seals gaskets used on stamped metal parts.
DynaGrip® Gasket Sealer is ideal for sealing frequently serviced flexible assemblies.
DynaGrip® Gasket Sealer seals and repairs most cut cork or paper gaskets.
DynaGrip® Gasket Sealer filles uneven flange surfaces.
DynaGrip® Gasket Sealer dries slowly, sets to a pliable film and remains flexible.
DynaGrip® Gasket Sealer is resistant to Oil, Water, Anti-Freeze, and Propane.
DynaGrip® Gasket Sealer has a working temperature up to 205°C and will withstand pressure of up to 300psi.
DynaGrip® Gasket Sealer is Australian made.

part no: 49311


DynaGrip® Muffler and Tailpipe Sealant

is recommended for the repair of exhaust system connections.

Apply before assembly to effectively prevent leaks. DynaGrip® Muffler and Tailpipe Sealant is easy to use and has a high temperature rating.

Asbestos free. DynaGrip® Muffler and Tailpipe Sealant is Australian made.
Part no: 49411


DynaGrip® Manifold Sealant
Safe for use on all exhausts.
Will withstand heat up to 300°C.
Expands when heated.
Safe for use on vehicles with oxygen sensors.
Will not harm catalytic converters.
Seals against exhaust fumes.
Asbestos free.
Australian made.

Part No: 49412


DynaGrip® Disc Brake Squeal Free

is a special formulated elastometric formulation that dampens the vibration that causes disc brakes to squeal and squeak.

When applied it forms a high temperature, water resistant film to silence disc brake squeal.


DynaGrip® Disc Brake Squeal Free

is a special formulated elastometric formulation that dampens the vibration that causes disc brakes to squeal and squeak.

When applied it forms a high temperature, water resistant film to silence disc brake squeal

Part No: 49662


DynaGrip® Rubberised Undercoating

is a scientifically formulated, rubber fortified coating to protect the entire undercarriage of the vehicle from road acids, salts and small rock damage.

DynaGrip® Rubberised Undercoating has the highest adhesion to painted and unpainted surfaces as well as to old anti-corrosive coatings.

Part No: 52175


DynaGrip® Rear View Mirror Adhesive

professionally bonds rear view mirror to windshield, sets in seconds.

Mirror can be mounted to button after 10-15 minutes. The two-part formula is adhesive and primer.

In it's set format DynaGrip® Rear View Mirror Adhesive can withstand a holding strength of 3000psi and can withstand temperatures of 121°C.

Part No: 49401


DynaGrip® Rear Demister Repair Kit

comes complete to repair either broken grid lines or loose connector tabs.
Repairs broken grid lines.
Reattaches loose connector tabs.
Silver filled epoxy.
Permanent repair.
Demister can be used in 30 minutes.

Part No: 49402


DynaGrip® 5 Minute Epoxy Adhesive
Ideal for the repair of:
Ceramics, glass, automotive trim and fabric, wood, metals, fibreglass, rubber, concrete and most plastics.
Dries crystal clear, super strong and waterproof.

Part No:49409


DynaGrip® Contact and Trim Adhesive

is ideal for joining Wood, Chipboard, Leather, Metals, Plaster, Automotive Trim and Upholstery, Cork, Rubber, Laminates, Floor Tiles and much more.
DynaGrip® Contact and Trim Adhesive is ideal for use on most porous materials.
Available in 50mL, 250mL and 500mL.
Made in Australia

Part No:49430


 

ACCUTOOL® Super Glue

The Original Super Glue® Corporation's newest product is the ACCUTOOL® . The ACCUTOOL® has a revolutionary, easy to hold design and features high performance cyanoacrylate. The new ACCUTOOL® precisely applies the product where you want it, how you want it. You can get a continuous stream or drop-at-a-time application based on the amount of pressure you apply to the dispenser buttons. The Original Super Glue®: Fast. Easy. Effective.

Item # 19025


ACCUTOOL® Super Glue GEL

This new, innovative dispensing system allows for accurate control while utilizing an advanced formula of the Super Glue Corporation's signature product cyanoacrylate (Super Glue GEL). The easy to hold applicator design allows for either continuous stream or single drop control. No more sticky fingers! This glue works great when adhering to porous or vertical surfaces. It will not drip or run!

Item # 19026


Future Glue® Thick Gel

High Performance Future Glue® Gel works exceptionally well with vertical applications and fills gaps. Surfaces do not need to be cleaned! Its powerful adhesive formula works on dirty, greasy surfaces, and resists high and low temperatures as well as most chemicals. Its instant bonding power can be used for almost all porous and non-porous materials.

Item # 15101

Works best on:
Aluminum Brick Ceramic China Corkboard Fabric Fingernails Hard & Soft Wood Jewelry Leather Metal Most Plastics Porcelain Pottery Rubber Vinyl

 


4WD COVERS AH GO GAH HORN AIR FILTERS AIR HORNS ARMREST ASHTRAYS AUTO ACCESSORIES AUTO DRY WASH CLOTHS BABY BOLTS BACK SUPPORTS BADGES BATTERY CHARGERS BATTERY ISOLATOR SWITCH BLIND SPOT MIRRORS BOAT POLISH BOAT WASH BOAT WAX BODY FILLERS BOG BRAKE LIGHT REPAIR KIT BRAKE SHOES BUG SCREENS BULBS BUMPER SPRAY CABLE TIES CAR BATTERIES CAR COVER CAR MATS CAR STANDS CARAVAN COVERS CENTRE CONSOLES CHARGE AND MAINTAIN CHEMICALS CHEMIWELD COMPRESSION TESTER COOLANTS COOLING FANS CUT AND SHAPE MIRROR D SHACKLES DEGREASERS DISC PADS DISC PADS DOOR EDGE PROTECTORS DRI-LUBE DRIVE BELTS DRIVE SHAFTS DRIVING LIGHTS ELECTRIC WATER PUMPS ELECTRICAL TAPE ELECTRONIC IGNITION ENGINE PUMPS EXHAUST CLAMPS FAN BELTS FIBERGLASS FISHING ROD HOLDERS FOOT PUMPS FUEL CANS FUEL FILTERS FUEL HOSE GASKETS GLOSS BLACK GOGGLES H4 LIGHTS H7 LAMPS HAND PUMPS HEATER HOSES HELLA LAMPS HOSE CLAMPS HOUSINGS HYDRAULIC JACKS IGNITION COILS IGNITION LEADS INDUSTRIAL BELTS JACKS JOCKEY WHEELS JUMPER LEADS KEY FOBS L PLATES LEAD REPLACEMENT ADDATIVE LED HEADLAMPS LED LIGHTS LED TORCHES LENS REPAIR KITS LENS TINT LITTER BINS MAG WHEEL CLEANERS MASKING TAPE MASKS MATT BLACK MICRO CHAMOIS MICRO FIBRE CLOTHS MIRRORS MOTHER'S WAX ATTACK POLISHER MOTHERS WAX ATTACK POLISHER MOTOR BIKE STRAPS MUSICAL AIR HORN NAVIGATION LIGHTS NECK SUPPORTS NOLTEC SOFTRIDE URETHANE BUSHES OCCY STRAPS OIL CAPS OIL FILTERS P PLATES PAINT PAINT PETROL CAPS PHILLIPS LAMPS PLASTIC CHAMOIS PLASTIC DYE PLUGS POLISHES POLSHING CLOTHS PROJECTA RACK ENDS RADIATOR CAPS RADIATOR HOSES RECOVERY STRAPS RED BACK SPIDER GEAR KNOBS ROK STRAPS ROOF BARS ROOF BASKETS ROOF RACKS SEAT BELTS SEAT COVERS SLICK50 SLICK 50 SNATCH STRAPS SOLAR PANELS SPANNERS SPARE WHEEL COVERS STAINLESS STEEL BOLTS STEERING WHEEL COVERS SURGE GUARDS SWITCHES SYNTHETIC CHAMOIS SYNTHETIC OILS THERMOSTATS THINNERS TIE ROD ENDS TIMING BELTS TIMING LIGHTS TOOLS TOOLS TOP COAT CLEAR TOW HOOKS TOW ROPES TRAILER CABLE TRAILER LAMPS TRIPLE AIR HORNS TROLLEY JACKS TRUCK HOSES TRUCK WASH TUBE PATCHES TUBELESS TYRE REPAIR KITS TRUCK JUMPER LEADS TWIN AIR HORNS TYRE SPRAY TYRE VALVES UNIVERSAL JOINTS UTE HOOKS VACUMN TESTER WALL PROTECTORS WASHER MOTORS WATER HOSE WATER PUMPS WATERPROOF TRAILER LAMPS WHEEL BRACES WHEEL CHOCKS WHEEL CYLINDERS WINDOW SHADES WINDOW SOX WINDSCREEN WIPERS WIPER ARMS WIPER BLADES WIPER JETS WIPER MOTORS WIPER REFILLS